聚丙烯酰胺 量大價優標題：廠家批發 污泥脫水高離子度陽離子

溫馨提示：以上報價為陽離子聚炳烯酰胺40度 , 可以用于城市污水、壓泥、脫泥、煤礦水處理、選礦等行業，有粉狀有顆粒，25公斤/袋，也可以10公斤/袋，5公斤/袋，按客戶要求定制包裝。歡迎來電咨詢！15037122922   18538227865

鞏義市曉宇凈水材料有限公司專業生產各種高含量的陽離子聚炳烯酰胺、陰離子聚丙烯酰胺、非離子聚丙烯酰胺、兩性離子聚丙烯酰胺、粉狀聚炳烯酰胺

     聚丙烯酰胺是水溶性高分子聚合物，外觀為白色或微黃色粉粒，好可以為客戶加工速溶解超細粉陰陽非聚丙烯酰胺，PAM細粉容易吸水，長期受熱分解，分解溫度在200℃以上，在無氧條件下，210℃炭化為黑色粉末。不溶于大多數有機溶劑，具有良好的絮凝性，可以降低液體之間的磨擦阻力，聚丙烯酰胺離子特性可分為非離子、陰離子、陽離子和兩性型四種類型。

     聚丙烯酰胺幾乎不溶于苯，乙醚、酯類、丙酮等一般有機溶劑，其水溶液幾近透明的粘稠液體，屬非危險品，、無腐蝕性，固體PAM有吸濕性，吸濕性隨離子度的增加而增加，PAM熱穩定性好；加熱到100℃穩定性良好，但在150℃以上時易分解產中氮?dú)?，在分子間發生亞胺化作用而不溶于水，密度（克）毫升23℃1.302。玻璃化濕度153℃，PAM在應力作用下表現出非牛頓流動性。

Polyacrylamide is water-soluble polymer, appearance is white or light yellow toner particles, easy bibulous, long-term thermal decomposition, decomposition temperature above 200 ℃, under anaerobic conditions, 210 ℃ carbonized to black powder.Insoluble in most organic solvents, has good flocculation sex, can reduce the friction resistance between liquid, ion characteristics can be divided into non-ionic and anionic, cationic and amphoteric four types.
Polyacrylamide is almost insoluble in benzene, ether and ester, acetone and other general organic solvent, its aqueous solution nearly transparent viscous liquid, is a non-dangerous goods, non-toxic, non-corrosive, solid PAM has the water absorbability, moisture absorption increased with the increase of ionic degree, PAM thermal stability;Heated to 100 ℃ stability is good, but easy to decompose during nitrogen when above 150 ℃, effect that happens in between the molecules and amination and insoluble in water, density (g) 1.302 ml of 23 ℃.Vitrification 153 ℃, humidity PAM showed non-newtonian liquid under stress.

聚丙烯酰胺特點

     1、絮凝性：PAM能使懸浮物質通過電中和，架橋吸附作用，起絮凝作用。

     2、粘合性：能通過機械的、物理的、化學的作用，起粘合作用。

     3、降阻性：PAM能有效地降低流體的摩擦阻力，水中加入微量PAM就能降阻50—80%。

     4、增稠性：PAM在中性和酸條件下均有增稠作用，當PH值在10℃以上PAM易水解。呈半網狀結構時，增稠將更明顯。

1, flocculation sex: PAM can make the suspended material through electric neutralization, adsorption, flocculation effect.

2, adhesiveness, can pass the mechanical, physical, chemical, bonding effect.
3, drag-reducing: PAM can effectively reduce the friction resistance of fluid, the water add trace PAM would drag reduction of 50-80%.
4, thickening: PAM under the condition of neutral and acid are thickening effect, when the PH value in more than 10 ℃ PAM easy to hydrolysis.Half the reticular structure, thickening will be more obvious

     陰離子聚丙烯酰胺堿性，PH值7-14，水溶解性好，能以任何比例溶解于水且不溶于有機溶劑，在中堿性介質中呈高聚合物、電解質的特性。在鹽類電解質敏感與高價金屬離子能交聯中呈不溶性的膠體。用于工業廢水處理、飲用水處理、可作飼料、河水泥漿沉淀、洗發水、洗潔精、洗衣液、涂料、水泥增稠劑、粉狀聚炳烯酰胺在制香行業特別常用。

     陽離子聚丙烯酰胺，堿性PH值7-14，水溶解性好能以任意比例溶解于水且不溶于有機溶劑，呈高聚合物電解質的特性。用于帶陰電荷及富含有機物的廢水處理。用于選礦、煤礦、鋼廠水處理、電廠水處理、染色水、造紙、食品、建筑、冶金、油田、水產加工與發酵等行業有機膠體含量較高的廢水處理。用于城市污水、城市污泥、造紙污泥及其它工業污泥的脫水處理。

    非離子聚丙烯酰胺偏酸性，PH值3-5，是具有高分子量的低離子度的線性高聚物，具有絮凝、分散、增稠、粘接、成膜、凝膠、穩定膠體的作用。用于工業廢水處理，鋼廠廢水處理，冶金廢水處理，洗煤廢水處理。用于石油工業采油、鉆井泥漿處理。用于紡織上漿。用于造紙行業、食品行業、茶葉包裝紙?zhí)幚怼?/span>

     兩性離子聚丙烯酰胺是由乙烯酰胺和乙烯基陽離子單體、丙烯酰胺單體水解共聚而成，分子鏈上既有電荷又有陽電荷的兩性離子不規則聚合物。用于污泥脫水、生活污水、有機廢水的處理，用于以江河作水源的自來水的處理，用于造紙作增強劑或其它助劑，用于油田助劑如粘土防膨劑、油田酸化用稠劑，用于紡織上漿劑。

Anionic polyacrylamide good water solubility, can in any proportion dissolves in water and insoluble in organic solvents, in the alkaline medium is of high polymer, the electrolyte.With high metal ion in salt electrolyte sensitive to crosslinking of insoluble gel.Used in industrial wastewater treatment, water treatment, can make feed, the river sludge, the fragrance industry.

Cationic polyacrylamide to arbitrary proportion dissolves in water and insoluble in organic solvents, the characteristics of high polymer electrolyte.Used for wastewater treatment with negatively charged and rich in organic matter.Used in dyeing, papermaking, food, building, metallurgy, oil, aquatic product processing and fermentation industries such as waste water treatment of organic colloid content is higher.Used for urban sewage, urban sludge, papermaking sludge and other industrial sludge dewatering treatment.
Nonionic polyacrylamide is a low degree of ion with high molecular weight linear polymers, flocculation and dispersion, thickening, glue, film, gel, the action of stable colloid.For industrial wastewater treatment, steel mill waste water treatment, metallurgical waste water, coal washing waste water treatment.Used in the oil industry oil, drilling mud treatment.Used for textile sizing.Used in paper industry, food industry, tea packaging paper processing.
Zwitterionic polyacrylamide is made from ethylene amide and vinyl cationic monomer, hydrolysis of acrylamide monomer copolymerization, molecular chain both charge and irregular zwitterionic polymer with positive charge.Used in sludge dewatering, sewage and organic waste water processing, used to make water tap water processing with rivers, used in papermaking as strengthening agent, or other additives used in oil field additives such as clay expansion agent, oil field acidizing with thickening agent, used for textile sizing agent.

聚丙烯酰胺注意事項

    1、絮團的大?。盒鯃F(tuán)太小會影響排水的速度，絮團太大會使絮團約束較多水而降低泥餅干度。經過選擇聚丙烯酰胺的分子量能夠調整絮團的大小。

    2、污泥特性： 點理解污泥的來源，特性以及成分，所占比重。依據性質的不同，污泥可分為有機和無機污泥兩種。陽離子聚丙烯酰胺用于處置有機污泥，相對的陰離子聚丙烯酰胺絮凝劑用于無機污泥，堿性很強時用陽離子聚丙烯酰胺，而酸性很強時不宜用陰離子聚丙烯酰胺，固含量高時污泥通常聚丙烯酰胺的用量也大。

    3、絮團強度：絮團在剪切作用下應堅持穩定而不破碎。進步聚丙烯酰胺分子量或者選擇適宜的分子構造有助于進步絮團穩定性。

    4、聚丙烯酰胺的離子度：針對脫水的污泥，可用不同離子度的絮凝劑經過先做小試進行挑選，選出較佳適宜的聚丙烯酰胺，這樣即能夠獲得較佳絮凝劑效果，又可使加藥量較少，節約本錢。

    5、聚丙烯酰胺的溶解：溶解良好才能充分發揮絮凝作用。有時需求加快溶解速度，這時可思索進步聚丙烯酰胺溶液的濃度。

1, the size of the floccules: floccules is too small will affect the rate of drainage, floccules is lower the floccules constraints, more water and mud biscuits.After choosing the molecular weight of polyacrylamide can adjust the size of the floccules.
2, sludge characteristics: the first point to understand the sources of the sludge, the characteristics and composition and proportion.According to the properties of the different, the sludge can be divided into two kinds of organic and inorganic sludge.Cationic polyacrylamide used for disposal of organic sludge, relative anionic polyacrylamide flocculant used in sludge, inorganic alkali is very strong in the cationic polyacrylamide, and should not be used when strong acid anionic polyacrylamide, high solid content in sludge usually polyacrylamide dosage is large.
3, the intensity of floccules: floccules under shearing action should be stable and not broken.Progress of polyacrylamide molecular weight or choose the suitable molecular structure helps to progress floccules stability.
Ion degrees: 4, polyacrylamide for dewatering sludge, different ion flocculant are available after pick to do first test, select the best suitable polyacrylamide, which can achieve the best effect of flocculant, and can make the dosage, at least, to save money.
5, polyacrylamide dissolved: dissolve can give full play to good flocculation effect.Sometimes needs to speed up the dissolution rate, when the concentration of a solution of polyacrylamide can think progress. 

公司全稱：鞏義市曉宇凈水材料有限公司
公司地址：河南鞏義市芝田經濟技術開發區8號
聯系電話：15037122922