進口氫氣減壓閥德國洛克《DE LOCKE》現貨供應

一、進口氫氣減壓閥描述：

德國LOCKE洛克進口氫氣減壓閥，單級式膜片減壓結構，橡膠膜片壓力傳輸，專門為微壓工況使用要求研發設計，具有輸出壓力穩定，響應靈敏度高等特點。適用于純凈氣體、標準氣體、腐蝕性氣體等。主要應用于中等流量氣體系統。

Locke lock imported hydrogen pressure reducing valve, single-stage diaphragm pressure reducing structure, rubber diaphragm pressure transmission, is specially developed and designed for the use requirements of micro pressure condition, with the characteristics of stable output pressure and high response sensitivity. It is suitable for pure gas, standard gas, corrosive gas, etc. Mainly used in medium flow gas system.

二、進口氫氣減壓閥特性參數： 

最大輸入壓力：3000，500 psig

輸出壓力：0～25，0～50，0～100，

0～250 psig

安全測試壓力：1.5倍的最大輸入壓力

適用溫度：-40°F 至＋165°F（-40℃至＋74℃）

Maximum input pressure: 3000500 psig

Output pressure: 0-25, 0-50, 0-100,

0～250 psig

Safety test pressure: 1.5 times of the maximum input pressure

Applicable temperature: - 40 ° f to + 165 ° f (- 40 ℃ to + 74 ℃)

三、進口氫氣減壓閥設計特點：

1.單級式減壓結構

2.母體與膜片采用硬密封形式

3.母體螺紋：進出氣接口1/2" NPT（F），

4.壓力表，安全閥接口1/4〞NPT（F）

5.內設過濾網

6.可采用面板式或墻式安裝

1. Single stage decompression structure

2. The mother and diaphragm are hard sealed

3. Main thread: inlet and outlet 1 / 2 "NPT (f),

4. Pressure gauge, safety valve interface 1 / 4 "NPT (f)

5. Built in filter screen

6. Panel type or wall type installation can be adopted

■ design features

● diaphragm type pressure reducing structure ● main thread: 1 / 4 "NPT (f) ● filter screen inside ● panel type or wall type installation can be adopted

■ scope of application

● laboratory ● gas analysis test ● process control ● gas bus ● test equipment

■ characteristic parameters

● maximum input pressure: 30006000psig ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psig

● safety test pressure: 1.5 times of the maximum intake pressure ● applicable temperature: - 10 ° f to + 165 ° f (- 23 ° C to + 74 ° C)

Leakage rate: foam test > CV: 0.06: weight: 0.9kg

設計特點：

■ design features

● piston type pressure reducing structure ● main thread: 1 / 4 "NPT (f) ● filter screen inside ● panel type or wall type installation can be adopted

■ scope of application

● laboratory ● gas analysis test ● process control ● gas bus ● test equipment

■ characteristic parameters

● maximum input pressure: 30006000psig ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psig

● safety test pressure: 1.5 times of the maximum intake pressure ● applicable temperature: - 10 ° f to + 165 ° f (- 23 ° C to + 74 ° C)

Leakage rate: foam test > CV: 0.06: weight: 0.9kg