進口電動高壓閘閥質量就是好德國洛克《DE LOCKE》

一、進口電動高壓閘閥產品描述：

德國《LOCKE》洛克進口電動高壓閘閥(Electric gate valve)采用多回轉電動執行機構，可通過PLC遠程系統進行控制。根據實際工況需求，可帶防爆。根據分類方法不同可分為：平行式閘閥、楔式閘閥、升降式閘閥、旋轉桿式閘閥、快速啟閉閘閥、縮口閘閥、平板閘閥等。進口電動高壓閘閥流體阻力小，適用的壓力、溫度范圍大，介質流動方向不受限制，密封性能良好。

The electric gate valve imported from Locke, Germany, adopts multi rotation electric actuator and can be controlled by PLC remote system. According to the actual working conditions, it can be equipped with explosion-proof. According to different classification methods, it can be divided into parallel gate valve, wedge gate valve, lifting gate valve, rotary rod gate valve, quick opening and closing gate valve, necking gate valve, flat gate valve, etc. The imported electric high-pressure gate valve has small fluid resistance, wide applicable pressure and temperature range, unlimited medium flow direction and good sealing performance.

二、進口電動高壓閘閥技術參數：

1、規格范圍：DN15-DN1200

2、溫度范圍：-20℃≈350℃

3、壓力范圍：PN16-PN320

4、閥體材質：鑄鋼/不銹鋼/耐高溫鋼

5、閥桿材質：不銹鋼/耐高溫鋼

6、閥蓋材質：與本體一樣

7、閥板材質：不銹鋼/耐高溫鋼

8、連接方式：電動

9、適用范圍：水、油、氣用、蒸汽等介質

1. Specification range: dn15-dn1200

2. Temperature range: - 20 ℃ ~ 350 ℃

3. Pressure range: pn16-pn320

4. Valve body material: cast steel / stainless steel / high temperature resistant steel

5. Stem material: stainless steel / high temperature resistant steel

6. Valve cover material: the same as the body

7. Valve plate material: stainless steel / high temperature resistant steel

8. Connection mode: Electric

9. Scope of application: water, oil, gas, steam and other media

三、進口電動高壓閘閥結構優點：

1、采用中法蘭螺栓連接，支管兩端為法蘭連接結構。

2、閥座密封面采用鐵基鉻鎳不銹鋼堆焊而成，耐磨、抗擦傷性能好。

3、閥桿表面經抗蝕性氮化處理，具有良好的抗腐蝕性和抗擦傷性。

4、電動高壓閘閥的關閉和開啟由裝在閥蓋上的電動裝置來控制。電動裝置分別配有閥門專用電機、減速箱、轉矩控制機構、行程控制機構、現場操作機構，手、電動切換機構。閥門的開關均由行程控制機構調整，調整轉矩限制機構，可以在行程控制機構失靈的情況下，保護閥門。電動焊接閘閥關閉主要通過電動裝置及能夠調整的楔式雙閘板、萬向頂、夾圈等組成，借閥體內導向作升降運動。

5、電動裝置除能就地操作外，還可進行遠距離操作。

1. The middle flange bolt connection is adopted, and the two ends of the branch pipe are of flange connection structure.

2. The sealing surface of valve seat is made of iron-based chromium nickel stainless steel by overlaying welding, which has good wear resistance and scratch resistance.

3. The surface of the valve rod is treated by anti-corrosion nitriding, which has good anti-corrosion and anti scratch properties.

4. The closing and opening of the electric high-pressure gate valve are controlled by the electric device installed on the valve cover. The electric device is equipped with valve special motor, reducer, torque control mechanism, stroke control mechanism, field operation mechanism, manual and electric switching mechanism. The switch of the valve is adjusted by the stroke control mechanism, and the torque limiting mechanism is adjusted to protect the valve when the stroke control mechanism fails. The electric welding gate valve is mainly composed of electric device and adjustable wedge double ram, universal top, clamp ring, etc., and moves up and down by the guide in the valve body.

5. In addition to local operation, the electric device can also be operated remotely.