預制電纜井模具

預制電纜井模具為了滿足當前對于混凝土電纜井的制作需求而發布的，因為電纜井模具并沒有統一尺寸，每一種都是根據實際工程要求的外形定制的，尤其是內部孔的位置和大小。通過對各地區使用混凝土電纜井的習慣以及尺寸來說，大部分都是以方形為主，集中在1-1.5米長度，高度控制在1米以內，有時候為了脫模方便，會采用八角樣式的，這樣一來可以減短脫模時間，提高電纜井的制作效率。電纜井和電力井的區別不大，但是針對工程需要還是會區分一點。The prefabricated cable well mould is released to meet the current production requirements for concrete cable well, because there is no uniform size of cable well mould, each of which is customized according to the actual engineering requirements, especially the location and size of the internal hole. For the habit and size of concrete cable wells used in various regions, most of them are mainly square, concentrated in 1-1.5m length and controlled within 1m height. Sometimes octagonal style is used for the convenience of demoulding, which can reduce demoulding time and improve the production efficiency of cable wells. There is little difference between cable well and power well, but there is still a little difference for engineering needs.

The mold classification and description of prefabricated cable well are carried out according to the specific use area, mold material, size and other aspects, because in the use of cable inspection well, manual prefabrication is the main way, and there is little on-site pouring mode, so it is inconvenient for workers to carry and dismantle the formwork. Generally, cable wells are used in municipal, railway and other projects, and their use is basically the same as that of cable trays.

預制電纜井模具分類與說明是按照具體使用地區、模具材質、尺寸大小等幾方面內容進行的，因為在電纜檢查井的使用上，都是以人工預制為主，很少存在現場澆筑的模式，工人搬運、拆卸模板不方便。一般在市政、鐵路等工程上會使用電纜井，用處與電纜槽基本一致。