進口氮氣鋼瓶減壓閥德國洛克 物美價廉值得擁有 

一、進口氮氣鋼瓶減壓閥產品簡介：

德國洛克進口氮氣鋼瓶減壓閥，也叫氮氣瓶減壓器，The nitrogen cylinder pressure relief valve，就是將氮氣鋼瓶中的高壓氣體減為實驗及工況所需的低壓氣體壓力的減壓閥。采用活塞式減壓結構，輸出壓力穩(wěn)定，主要用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫(yī)藥、電子、國防航天等主導領域的氮氣鋼瓶的出口減壓。

The nitrogen cylinder pressure relief valve, also known as the nitrogen cylinder pressure relief valve, is a pressure reducing valve to reduce the high pressure gas in the nitrogen cylinder to the low pressure gas pressure required by experiments and working conditions. It is mainly used for export decompression of nitrogen cylinder in petrochemical industry, chemical fiber, lighting appliance, heat treatment, metallurgy, glass, food, medicine, electronics, national defense and aerospace.

二、進口氮氣鋼瓶減壓閥規(guī)格參數：

1、最大輸入壓力：3000，500 psig

2、輸出壓力：0～25，0～50，0～100， 0～250 psig

3、安全測試壓力：1.5倍的最大輸入壓力

4、適用溫度：-40°F 至＋165°F（-40℃至＋74℃）

1. Maximum input pressure: 3000500 PSI
2. Output pressure: 0-25, 0-50, 0-100, 0-250 psi

3. Safety test pressure: 1.5 times of the maximum input pressure

4. Applicable temperature: - 40 ° f to + 165 ° f (- 40 ℃ to + 74 ℃)

三、進口氮氣鋼瓶減壓閥設計特點：

● 活塞式減壓結構 ● 母體螺紋：1/4" NPT（F） ● 內設過濾網 ● 可采用面板式或墻式安裝

■ 適用范圍

● 實驗室 ● 氣體分析測試 ● 流程控制 ● 氣體匯流排 ● 測試設備

■ 特性參數

● 最大輸入壓力： 3000，6000psig   ● 輸出壓力：0~250,0~500,0~1500,0~3000psig

● 安全測試壓力：1.5倍的最大進氣壓力 ● 適用溫度：-10℉~+165℉(-23℃~+74℃)

● 泄漏率：泡沫測試 ● CV值：0.06 ● 重量：0.9kg

材質：

◆母體：316L，Brass

◆上蓋：316L，Brass

◆膜片：316L

◆過濾網：316L（10μm）

◆閥座：PCTFE，PTFE，Vespel

◆彈簧：316L

◆閥芯頂桿：316L

Piston type pressure reducing structure ● mother thread: 1 / 4 "NPT (f) ● filter screen inside ● can be installed in panel or wall

■ scope of application

● laboratory ● gas analysis and test ● process control ● gas bus ● test equipment

Characteristic parameters

Maximum input pressure: 30006000 psi ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi

Safety test pressure: 1.5 times of maximum inlet pressure ● applicable temperature: - 10 ℃～ 165 ℃ (- 23 ℃ ~ + 74 ℃)

Leakage rate: foam test > CV: 0.06: weight: 0.9kg

texture of material:

Maternal body: 316L, brass

Upper cover: 316L, brass

Membrane: 316L

Filter screen: 316L (10 μ m)

Valve seat: PCTFE, PTFE, Vespel

Spring: 316L

Valve core ejector: 316L