宏旭—擋浪石模具—消浪石模具

擋浪石模具的具體作用就是阻止海浪上岸。為海浪施加壓力。在一些水利工程的建設和船運港口的修建可以常常看到。當海浪經過大范圍的緩沖石的時候緩沖石會給海浪帶來很大的阻力，拖慢海浪行進的步伐。在海浪到達防浪堤的時候就沒有一開始那么大的沖擊力和破壞力，既可以保護防浪堤也可以保護海岸，所以才被稱為擋浪石模具。在使用緩沖石護岸模具之前我們可以為模具刷上防銹油，方便脫模的操作也可以延長模具的使用壽命一舉兩得。然后將混凝土倒進模具里邊，再用棍子進行細細的攪拌，確保模具里面的混凝土沒有大顆粒的異物就可以使用大功率的振動棒震動模具排除氣泡了，氣泡如果沒有即使的排出去就會凝固在混凝土的和表層。生產出來的緩沖石就會表面粗糙，凹凸不平，有著大大小小的蜂窩狀孔洞，在投入使用后經過海水的不斷沖刷蜂窩狀的孔洞就會不斷的擴大，導致整個緩沖石破裂，影響整體的使用效果。The specific function of the wave breaker mold is to prevent the sea wave from landing on the shore. Put pressure on the waves. In the construction of some water conservancy projects and shipping ports, we can often see. When the wave passes through a large area of buffer stone, the buffer stone will bring great resistance to the wave and slow down the pace of the wave. When the waves arrive at the breakwater, there is not so much impact force and destructive force at the beginning, which can protect both the breakwater and the coast, so it is called the wave break stone mold. Before using the buffer stone revetment mold, we can brush antirust oil on the mold to facilitate the demoulding operation and prolong the service life of the mold, killing two birds with one stone. Then pour the concrete into the mold, and then use the stick for fine mixing to ensure that the concrete inside the mold does not have large particles of foreign matter, you can use a high-power vibrator to vibrate the mold to eliminate bubbles. If the bubbles are not discharged, they will solidify on the concrete and surface. The produced buffer stone will have rough surface and uneven surface, with large and small honeycomb holes. After being put into use, the honeycomb holes will continue to expand after being washed by sea water, leading to the fracture of the whole buffer stone and affecting the overall use effect.