廣東臺銘實業有限公司
店齡5年 · 企業認證 · 廣東省東莞市
手機掃碼查看 移動端的落地頁
廣東臺銘實業有限公司
主營產品: 大功率LED燈珠, led燈珠, 貼片led燈珠, 0603貼片led燈, 0805貼片led燈, 視覺光源led燈珠, 1206貼片led燈, 全光譜led燈珠, COB 面光源, 紅外線接收頭, 數碼管, 汽車照明led燈珠, 安防led產品, 0201貼片LED燈, 貼片側發光led燈, 直插led燈珠, 雙色led燈珠, 帶座led燈珠, UV紫光LED燈珠, led燈珠廠家, 光敏三極管, 紅外對管, 食人魚led燈珠, 5050rgbw, 5050rgb燈珠, 3535rgb全彩, 2835貼片led燈, 3030全光譜led
臺灣臺銘實業3mm白發藍霧狀燈珠耐高溫插件
價格
訂貨量(個)
¥0.01
≥10000
店鋪主推品 熱銷潛力款
萦营萩萬萨萪营萩萨萩萨
在線客服
廣東臺銘實業有限公司
店齡5年 企業認證
聯系人
陳子華 業務經理
聯系電話
萦营萩萬萨萪营萩萨萩萨
經營模式
生產廠家
所在地區
廣東省東莞市
Type 規格/型號 | Emitting Color 顏色 | Material 原材料 | View Angle 發光角度 | VF(V) 電壓 | IV (MCD) 亮度 | WL(nm) 波長 | IF(MA) 電流 | |||
Typ | Max | Min | Typ | Min | Max | |||||
TM-L03R-E (紅光) | Red | AlGaInP | 30° | 1.8 | 2.4 | 2000 | 4000 | 620 | 630 | 20MA |
TM-L03Y-E (黃光) | Yellow | AlGaInP | 30° | 1.8 | 2.4 | 300 | 600 | 585 | 595 | 20MA |
TM-L03O-E (黃綠) | Yellow Green | AlGaInP | 30° | 1.8 | 2.4 | 50 | 100 | 565 | 575 | 20MA |
TM-L03O-E (橙光) | orange | AlGaInP | 30° | 1.8 | 2.4 | 300 | 600 | 600 | 610 | 20MA |
TM-L3CG-E (翠綠) | Green | InGaN/GaN | 30° | 2.8 | 3.4 | 1200 | 8000 | 520 | 530 | 20MA |
TM-L3B-E (藍光) | Blue | InGaN/GaN | 30° | 2.8 | 3.4 | 300 | 500 | 460 | 475 | 20MA |
TM-L3UV365-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 6 | 8 | 365 | 370 | 20MA |
TM-L03UV370-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 10 | 13 | 370 | 375 | 20MA |
TM-L3UV380-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 14 | 18 | 380 | 385 | 20MA |
TM-L03UV400-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 60 | 70 | 395 | 400 | 20MA |
TM-L03UV405-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 70 | 80 | 400 | 405 | 20MA |
TM-L03UV410-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 80 | 90 | 405 | 410 | 20MA |
TM-L3NB55-E (白光) | White | InGaN/GaN | 30° | 2.8 | --- | 6000 | --- | 5500 | 6000 | 20MA |
TM-L3ZB65-E (白光) | White | InGaN/GaN | 45° | 2.8 | --- | 6000 | --- | 6500 | 7000 | 20MA |
TM-L3LB80-E (白光) | White | InGaN/GaN | 30° | 2.8 | --- | 6000 | --- | 2500 | 10000 | 20MA |
Supporter shaping:
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
- 應用范圍:照明、指示、背光等