

山東通華機械有限公司
主營產品: 其他壓實機械
1噸振動式壓路機百度優選-通華機械振動式壓路機百度優選-通華
價格
訂貨量(臺)
¥45000.00
≥1
店鋪主推品 熱銷潛力款
钳钻钸钵钻钵钼钹钴钴钴

山東通華機械有限公司
店齡6年
企業認證
聯系人
申立群 銷售經理
聯系電話
钳钻钸钵钻钵钼钹钴钴钴
經營模式
生產加工
所在地區
山東省濟寧市
主營產品
小型振動式壓路機操作中的注意事項
1、緩加油。振動式壓路機在起步和加速時,加油要輕、緩,以防止輪胎打滑和側滑現象的發生。
2、巧減速。振動式壓路機減速時,要充分利用發動機的“牽阻”制動進行減速。
3、慢轉向。振動式壓路機在轉向時,也要先減速,適當加大轉彎半徑并慢打方向盤,方向盤的操作要勻順和緩,不然也會發生側滑,使車尾向外側甩出。
4、多預見。由于冰雪路面滑的特點,振動式壓路機不能按您的意志去操縱,會給駕駛造成很大困難,所以駕駛時要特別小心。
振動式壓路機根據公路類型來選型
下面是山東通華機械廠家教你振動式壓路機根據公路類型(等級)來選型
1、對于一、二級國家干線公路和汽車專用路,應使用6~10t的具有較高壓實能力的大型振動振動式壓路機;對于三級以下的公路,或不經常進行壓實作業時,h好配備2t左右的機動靈活的振動振動式壓路機。
For the first and second grade national trunk roads and special roads for automobiles, 6-10t large-scale vibratory roller with high compaction capacity should be used; for the highways below the third xgrade, or when compaction operationxs are not often carried out, it is better to equip with about 2T mobile and flexible vibratory roller.
2、對于水泥混凝土路面,可采用輪胎驅動式串聯振動振動式壓路機;
For cement concrete pavement, tyre-driven series vibratory roller can be used.
3、對于瀝青混凝土路面,應選用全驅動式振動振動式壓路機;
For asphalt concrete pavement, full-drive vibratory roller should be selected.
4、對于高j級路面路基的底層,h好選用輪胎振動式壓路機或輪胎驅動振動振動式壓路機進行壓實,以獲得均勻的密實度;
For the bottom of high-grade pavement subgrade, it is better to use tyre roller or tyre-driven vibratory roller for compaction, in order to obtain uniform density;
5、修補路面時可選用靜力作用式光輪振動式壓路機。
When repairing the road surface, the static acting light wheel roller can be selected.
振動式壓路機可根劇壓實的物料來選型
山東通華機械生產廠家教大家振動式壓路機可根據壓實的物料的種類來選擇
1、對于巖石填方壓實,應選用大噸位振動式壓路機,以便使大型塊料發生位移;
For rock filling compaction, large-tonnage roller should be selected in order to displace large blocks.
2、對于粘土的壓實,h好使用凸塊搗實式振動式壓路機;
For the compaction of clay, it is better to use bump ramming roller.
3、對于混合料的壓實,h好選擇振動式振動式壓路機,以便使大小粒料摻和均勻;
For the compaction of mixtures, it is better to choose vibratory roller in order to make the mixing of large and small particles uniform.
4、深層壓實宜采用重型振動振動式壓路機慢速碾壓,淺層則應選用靜力作用式振動式壓路機。
Heavy vibratory roller should be used for deep compaction and static roller for shallow compaction.
