進口軌道球閥德國洛克品牌

進口軌道球閥結構特點：

1、無關無磨損:球體偏離閥座后再轉動消除了閥座的磨擦，解決了傳統球閥、閘閥、旋塞閥的閥座磨損問題。

2、單閥座設計:軌道閥門的靜態單閥座能夠保障零泄露，避免了雙向閥座閥門的內腔壓力升高的問題。

3 流體特性:全通徑和縮徑閥門在開位時都有很高的Cv值。提高泵了的系統效率，并且使腐蝕問題降到了*程度。

4、頂裝式設計:在系統泄壓后，可以在線檢查和維修，使維護簡魚化。

5、雙閥桿導向銷:硬性閥桿導槽與導銷控制閥桿的升降和轉動。

6、自清洗:當閥芯傾離閥座時，流體沿密封面360度將一些外來的雜物沖洗干凈。

7、低扭矩操作:除特大尺寸外，其他尺寸的閥門均可配置小手輪而無需齒輪箱。因?yàn)檐壍篱y門密封面無摩擦，轉動特別容易。

8、杭磨閥芯硬密封面:閥芯表面堆焊了一層硬質拋光密封面，能夠在不損壞密封完整性的情況下滿足非?？量坦r的密封要求。

9、機械楔形密封:閥桿下端的斜面提供一個機械的楔緊力以保證持續的緊密封。

Structural features of imported orbital ball valve:

1. Irrelevant and wear-free: the ball deviates from the valve seat and then rotates to eliminate the friction of the valve seat, and solves the valve seat wear problem of the traditional ball valve, gate valve and plug valve.

2. Single seat design: the static single seat of rail valve can ensure zero leakage and avoid the problem of cavity pressure rise of double seat valve.

3 fluid characteristics: both full bore and reduced size valves have high CV values in open position. The efficiency of the pump system is improved and the corrosion problem is reduced to the degree of *.

4. Top mounted design: after the system is depressurized, online inspection and maintenance can be carried out to simplify the maintenance.

5. Double stem guide pin: rigid stem guide groove and guide pin control the lifting and rotation of the valve stem.

6. Self cleaning: when the valve core leans away from the valve seat, the fluid will flush some foreign debris along the sealing surface 360 degrees.

7. Low torque operation: except for extra large size, valves of other sizes can be equipped with small handwheels without gearbox. Because there is no friction on the sealing surface of rail valve, it is very easy to rotate.

8. Hard sealing surface of hangmo valve core: the surface of valve core is overlaid with a layer of hard polished sealing surface, which can meet the sealing requirements under very harsh working conditions without damaging the sealing integrity.

9. Mechanical wedge seal: the bevel at the lower end of the stem provides a mechanical wedge force to ensure continuous tight seal.

進口軌道球閥規格參數：

1.公稱通徑：DN25-DN700

2.公稱壓力：1.6Mpa-20Mpa

3.適用溫度：-196℃~550℃

4.適用介質：水、油、蒸汽

5.閥體材質：鑄鋼、碳鋼

6.連接方式：法蘭連接

7.傳動方式：手動、電動、氣動

8.設計標準：GB/T12236

9.結構標準：GB12221

10.試驗標準：GB/T13927

進口軌道球閥工作原理：

順時針轉動手輪，閥桿上設有準確導向槽使球體順時針轉動90度，在閥桿的楔臂作用下球體向前擺動迫使球體密封面靠貼閥座密封面，達到密封效果。逆時針轉動手輪使閥桿上升，球芯在閥桿楔臂和閥桿準確導向槽的作用下，先離開密封面(無摩擦)后球體逆時針轉動90度，達到軌道球閥 的開啟。

凸輪的原理使得閥球在旋轉中與閥座密封面脫離，旋轉到位后再將閥球推向閥座實現密封。當閥門處于全開位置時，瞬時針轉動手輪，在閥桿螺母與止推軸承配合下，閥桿開始下降并帶動球體開始旋轉。連接轉動手輪，閥桿上的精密螺旋曲線槽軌道，與嵌于其內的導向銷相互作用，帶動球體隨閥桿不停地按順時針?lè)较蜣D(zhuǎn)動。當閥門將要關閉時，閥桿帶動球體在與閥座密封面完全無摩擦的情況下旋轉了90°。繼續轉動手輪，再次下降的閥桿通過閥桿下端的凸輪結構機械地壓迫球體，使球體密封面與閥座密封面緊密接觸，從而達到密封的目的。軌道硬密封球閥處于全關位置時逆時針轉動手輪，在閥桿螺母與止推軸承的配合下，閥桿開始上升，并帶動球體開始旋轉，。連續轉動手輪，閥桿會在向上升的同時帶動球體趨向閥座。軌道硬密封球閥將要開啟時，閥桿上的精密螺旋曲線槽軌道與嵌于其中的導向銷相互作用帶動球體在與閥座密封面完全無摩擦的情況下不停地按逆時針?lè)较蜣D(zhuǎn)動。繼續轉動手輪，當閥桿升到極限位置時，此時球也已隨閥桿倒轉了90°，閥門已處于全開位置。軌道硬密封球閥結構特點：傳統的球閥，無論是浮動式或固定式，球體與閥座始終接觸，開關扭矩大，密封面容易損傷，軌道球論著啟閉時，球體先偏轉-δ角，然后轉動，開關全過程中球體與閥座脫離，故閥座不會被擦傷，并且啟閉扭矩小。

進口軌道球閥產品簡介：

德國洛克《DE LOCKE》進口軌道球閥采用一體式閥門體設計，上裝式結構可實現主要內件在線維修和更換組件，而無需將閥門從管線上卸下。具有雙阻塞及泄放功能，并且其注射封膠系統可保證在緊急狀況下陰斷源自閥桿和座圈處的泄漏。