東莞市臺銘光電科技有限公司
店齡6年 · 企業認證 · 廣東省東莞市
手機掃碼查看 移動端的落地頁
東莞市臺銘光電科技有限公司
主營產品: 視覺光源led燈珠, 插件led燈珠, 大功率led燈珠, 貼片led燈珠, 紅外線發射管, 全光譜植物led燈珠, 紅外線接收頭有, 0805貼片led燈, 0603貼片led燈, 0402貼片led燈, 1206貼片led燈, 5050貼片led燈, 3535貼片led燈, 5730貼片led燈, 0201貼片led燈, 1615貼片led燈, 小蝴蝶led燈珠, 食人魚led燈珠, COB 面光源
臺灣臺銘光電5mm草帽led電子
價格
訂貨量(個)
¥0.01
≥5000
店鋪主推品 熱銷潛力款
㜉㜈㜃㜇㜄㜌㜈㜃㜄㜃㜄
在線客服
東莞市臺銘光電科技有限公司
店齡6年 企業認證
聯系人
陳子華
聯系電話
㜉㜈㜃㜇㜄㜌㜈㜃㜄㜃㜄
經營模式
生產廠家
所在地區
廣東省東莞市
注:亮度、角度、色溫、紫光波段均可按客戶要求做貨。
Type 規格/型號 | Emitting Colo r 顏色 | Material 原材料 | View Angle 發光角度 | VF(V) 電壓 | IV (MCD) 亮度 | WL(nm) 波長 | IF(MA) 電流 | |||
Typ | Max | Min | Typ | Min | Max | |||||
TM-L05CMR-E (紅光) | Red | AlGaInP | 110° | 1.8 | 2.4 | 3000 | 4000 | 620 | 630 | 20MA |
TM-L05Y-E (黃光) | Yellow | AlGaInP | 110° | 1.8 | 2.4 | 300 | 800 | 585 | 595 | 20MA |
TM-L05CMCG-E (翠綠) | Green | InGaN/GaN | 110° | 2.8 | 3.4 | 3000 | 4000 | 520 | 530 | 20MA |
TM-L05CMB-E (藍光) | Blue | InGaN/GaN | 110° | 2.8 | 3.4 | 800 | 1200 | 460 | 475 | 20MA |
TM-L05UVCM365-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 6 | 8 | 365 | 370 | 20MA |
TM-L05UVCM370-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 10 | 13 | 370 | 375 | 20MA |
TM-L05UVCM380-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 14 | 18 | 380 | 385 | 20MA |
TM-L05UVCM400-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 60 | 70 | 395 | 400 | 20MA |
TM-L05UVCM405-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 70 | 80 | 400 | 405 | 20MA |
TM-L05UVCM410-E (紫光) | Purple | InGaN/GaN | 110° | 2.8 | 3.4 | 80 | 90 | 405 | 410 | 20MA |
TM-L05ZBCM55-E (白光) | White | InGaN/GaN | 110° | 2.8 | 3.4 | 1800 | 2200 | 2500 | 21000 | 20MA |
Supporter shaping:
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.