去高頻感應加熱設備廠家實地考察，拿需要處理的工件進行現場實驗。注意高頻感應加熱設備的耗電量，必要的時候要拿電表現場測試一下，避免買個“電老虎”回去，造成買得起，用不起的尷尬局面。重要的是要重視產品的整體質量，我們可以打開高頻感應加熱設備機柜看一下，元器件，線路等是否都順序井然等。

可以使金屬物體瞬間被加熱到所需的任何溫度，包括其熔點；2）不需要象其它加熱方式那樣，先產生高溫后再去加熱被它加熱的金屬物體，可以在金屬物中直接產生高溫；3）不但可以使金屬物體整體加熱，也可以選擇性地對每個部位進行局部加熱；4）是一種加熱方式的革命，同樣是電能加熱，它卻可以比電爐、電烘箱等節電百分之四十。
自動化程度高,可實現全自動無人操作,提高勞動生產率。加熱速度快，氧化脫碳少，由于中頻爐感應加熱的原理為電磁感應,其熱量是由于工件自身產生，該加熱方式升溫速度快,氧化極少,加熱效率高,工藝重復性好,金屬表面只有很輕微脫色,輕微拋光就可使表面恢復鏡面光亮,從而有效獲得恒定一致的性能。能耗低、無污染，加熱效率高,與其他加熱方式相比,有效地降低了能耗,勞動生產率高、無污染、設備符合環保要求。

壽命長
1、日佳電路設計的逆變電壓很低，這樣不光是抗惡劣環境也延長了使用壽命。
2、去掉電解濾波電容改用無極薄膜電容，因?yàn)殡娊怆娙菀话銐勖?0年左右，而薄膜電容壽命比它要高幾倍，大大提高了機器的壽命。
3、可以定制全封閉機器，用十年后內部依然如新。
Durable in use
1. Ri Jia products inverter voltage is very low, so it is not only the anti-harsh environment but also extends the service life.
2. Remove the electrolytic filter capacitor and switch to a non-polar film capacitor, because the electrolytic capacitor generally lives about 10 years, and the life of the film capacitor is several times higher than that, which greatly improves the life of the machine.
3. We can customize the fully enclosed machine, and it will remain new after 10 years.

應用廣
1、工作頻率范圍寬：日佳加熱設備頻率500HZ—200KHZ、在以上頻段日佳加熱設備都可以做到功率輸出。模擬機工作頻率范圍窄一般都在10KHZ左右，超過這個頻率范圍功率都會變小或者不工作。
2、加熱負載范圍寬、輕重負載都可以達到匹配輸出、一臺機器可以加熱導磁性強的金屬鋼鐵等負載重的工件，也可以導磁性弱金屬鋁銅等負載輕的工件大功率加熱。而模擬機器則需要配置不同的兩臺機器才能完成。
2. Widely application
1. Wide range of working frequency: the frequency of Ri Jia products heating equipment is 500HZ--200KHZ, and the optimal power output can be achieved at that frequency range. The operating frequency range of the simulator is generally around 10KHZ,so beyond the frequency range ,it will be smaller or does not work.
2, wide range of heating load, heavy load . We can ensure the best match output, a machine can heat conductivity magnetic metals such as steel strong negative load artifacts, can also be weak magnetic conductivity of aluminum copper light artifacts and high-power heating load. The simulation machine requires two different machines to complete.